Monday, September 9, 2013

DIY Craft Table Tutorial



Pinned over 20,000 times. 
Thank you for reading my 
DIY 
CRAFT TABLE TUTORIAL



This is the photo on my DIY Pinterest Board. 




We interrupt your regularly scheduled tutorial to bring you this PSA. Think safety first!!  Please don't forget to wear safety goggles, earplugs, and a mask:)) This is me using the power sander to redo our stairway.  Now onto the DIY Craft Table Tutorial!!




My craft table was made using the following tools: The size depends on the size of your room, and allowing for a 3-4 foot clearance on all sides. My table is 6 feet x 4 feet.

*3/4 inch thick Birch Plywood (cut to size at your home improvement store)
*carpenter's wood glue ( I used Gorilla Wood Glue)
*finishing nails
*stainable wood putty
*drill(bit size= smaller than your finishing nails)
*red oak trim molding(enough to fit around your table, cut to size at store) mine came to 20ft.
*stain of choice( I used Minwax Stain and Sealer in Bombay Mahogany)
*power sander
*3/4 inch square dowel
*safety gear( Earplugs, mask, goggles)
*work gloves
*countersink tool
*stain applicators of choice(read the back of your stain can to see if it recommends a brush or staining cloth)




Apply wood glue along edge of your tabletop and place trim , hold in place while you drill a pilot hole through the trim and tabletop. Countersink your finishing nails. Repeat for all sides. Apply wood putty over the nails and sand after dry.




Countersink tool.




My red oak molding came in 20 foot sections, so in order to use one piece, I just had the home improvement store make straight cuts the same length as the sides of my tabletop. Then to fill in the gap at the corners, I used a 3/4 inch square dowel and attached it with wood glue and finishing nails. I used the power sander to create the detail to somewhat match the molding trim piece.




Apply stain according to the directions on your can,  and allow to dry appropriate time before placing on your bases. Enjoy your handiwork!! Thank you for visiting today and don't forget to subscribe and comment to make my day:)

36 comments:

  1. where did you get your bookshelves that are under the table? Love the wheels on them too!

    ReplyDelete
    Replies
    1. Hi Colleen! The bookshelves are from walmart.com they have large cubbies that fit 13"x13" it so bins from target.

      Delete
  2. Did you put a gloss finish on that or is that just the stain? It's beautiful! LOVE that room!

    ReplyDelete
    Replies
    1. Hi Robyn! That is just the stain drying, I couldn't wait it snap a pic:) it is an eggshell finish now that it has dried completely. Thank you for your kind comments!

      Delete
  3. This comment has been removed by the author.

    ReplyDelete
    Replies
    1. Where did you get the wheels for the cubicles? I made my own craft table too... similar to yours. :) my caster wheels i got for the Kallax book shelves unit in ikea. I was just curious since you got yours in walmart if they are working well for you.

      Delete
    2. dear m p ,
      Yes, these are holding up wonderfully! Loaded up with hundred pounds of paper and super sturdy, these are heavy duty, industrial strength locking wheels. They came already installed on the unit, fully assembled. thanks for your comment :)

      Delete
  4. Could you tell me the dimensions of the storage cubes/shelves that you used?

    ReplyDelete
  5. Dear msallen,
    Facing the front they are, 47 1/4" wide x 35 1.2" tall x 13" deep

    ReplyDelete
  6. I’m soooo happy through your blog posts, and waiting for the upcoming posts.directory

    ReplyDelete
  7. I'd be trampled if all sites gave articles like these awesome articles.I really enjoy reading and also appreciate your work. look at this site

    ReplyDelete
  8. Hi! Did you use anything to attach the top to the cubes or just set it on them?

    ReplyDelete
  9. Hi! Did you use anything to attach the top to the cubes or just set it on them?

    ReplyDelete
  10. Hi! Did you use anything to attach the top to the cubes or just set it on them?

    ReplyDelete
  11. Your craft table look so pretty and cool like the one table at https://topbenchgrinders.com site, it was home made too. The red oak trim molding is one thing I dont have and I need I think, good post how so ever.

    ReplyDelete
  12. Enhance abilities and information. A gathering situation is an awesome method to learn new abilities in your picked craft, and to get help with issue territories. Veteran crafters love to share information and are glad to help.
    Free SVG Cutting Files

    ReplyDelete
  13. Set aside the opportunity to take a gander at the distinctive styles to discover which cutting load up is best for your kitchen, since it is something that, whenever dealt with effectively, will keep going you quite a while! FindSaw

    ReplyDelete
  14. As it were, a wood machine can give you more authority over your wooden undertaking and causes you shape it the manner in which you saw it to be.special info

    ReplyDelete
  15. The overwhelming engine on the bureau saw regularly requires up to three vee belts or a serpentine belt to drive the sharp edge, giving it the additional power it needs to coast through even hardwoods and thick timber. look at this web-site

    ReplyDelete
  16. Space sparing alternatives are accessible through settling tables that come in sets of two and three.ELECTROLUX APPLIANCE REPAIR & SERVICE IN SANTA BARBARA

    ReplyDelete
  17. Coffee tables come in a great many various shapes and sizes, as do living zones. When making your buy you have to locate the size and shape that will best match your room while as yet looking and working how you require.best wheel coffee tables

    ReplyDelete
  18. I used the new garden party table runner, which is an easy statement piece. Fresh flowers complimented the party supplies. On the back of the chairs, wood dining chairs wholesale

    ReplyDelete
  19. There are numerous decisions of tableware pieces accessible in the market today.wholesale dinnerware suppliers

    ReplyDelete
  20. Numerous individuals will see they don't have space for a 9 footer thus they'll minimization to a 7 footer. It's smarter to have a table at that point to not, even a more modest one, yet a more modest table won't be as much fun or help your game as much as an appropriately measured table. Table Mate

    ReplyDelete
  21. Most of the nonexclusive stores guarantee you fast establishment and conveyance, yet neglect to satisfy them; at the same time, the furniture stores having an online presence adhere to their promise and give you establishment and conveyance benefits as referenced in their arrangements. end table with USB ports

    ReplyDelete
  22. The patterns of purchasing furniture have advanced as fast as the human existence, and the recent fad of furniture shopping is purchasing Furniture Online. Daniel

    ReplyDelete
  23. Dissimilar to jaws on English tables, the jaws here are wide making it simple to play shots along the pads. The middle pockets are not that open, supporting a straight-cut style rather than rakish shots. online wooden table

    ReplyDelete
  24. There are certain rider benefits you will get upon choosing the furniture removals. Under the rider benefits your furniture will be insured for all sorts of potential or expected damages that can occur during the transit. Alexander Removals

    ReplyDelete
  25. Fabric protection is ideal for many types of businesses and industries, because when you let the general public use your furniture, you are always going to run the risk of damage and spillages, because accidents do happen from time to time. Ultra Guard

    ReplyDelete
  26. Superb post! This post is very useful and I get interesting while reading it. Waiting for more post like this. Thanks for posting such a good post.나주출장샵추천
    목포출장샵추천
    순천출장샵추천
    여수출장샵추천
    익산출장샵추천
    정읍출장샵추천
    남원출장샵추천

    ReplyDelete